Smooth and Uninterrupted
With a trapezoidal tempered glass and three built-in 120mm ARGB fans to allow high air flow go through the aggressive angled slots.
A clean designed side glass panel without the thumb screws getting in the way visually. A unique designed mechanism which allows the side glass panel to slide and clip right into the case. Therefor you are able to function the 4mm tinted tempered glass with ease, which displays your internal rig components.
One Press and Sync All
Handy I/O port on the top of the case featuring a ARGB fans control button, allowing you to cycle through all the lighting effects by simply pressing a button. A 3-sec hold of the button will sync the fans to your RGB motherboard 5v 3-pin. A high-speed USB 3.0, two USB 2.0 ports, a HD audio jack and a power button can also be found on the I/O port.
Magnetic Dust Filter
A magnetically held dust filter, located on top of the TALOS E2 to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter.
Speed It Up, slow it down
A single easy push button, controls the 3 different speeds for the three 120mm ARGB fans. Aim for performance or keep is low and quite.
The accommodation inside TALOS E2 is able to support up to eight 120mm fans. Mounting points for a 280mm, 240mm radiator at the top and front, 120 mm radiator in the rear.
|HDD cage||2 x 3.5"" or 1 x 2.5""+1 x 3.5|
TALOS E2 Overview
"Amusing and Effective"TALOS E2, mid –tower case with front trapezoidal tempered glass panel and three 120mm eye-catching ARGB lighting fans. Sleek tinited tempered glass side panels fully displays all components and leads to a brand new visual display experience!
- Trapezoidal Tempered Glass Panel
- 3 Built-in 120mm ARGB Fans
- Seamless Tempered Glass Window
- Support RGB Motherboard Sync Software
- Power Cover Design
- Magnetic Dust Filter
- One Touch to Easily Switch RGB Streaming Lighting Style, and LED off
|Product Name||TALOS E2|
|Case Type||MID Tower|
|Motherboard Support||mini-ITX, microATX, ATX|
|Synchronization||5V (3pin) with ASUS / MSI /ASROCK / GIGABYTE motherboard|
|Material||SPCC & ABS & Tempered glass|
|Radiator Support||"Top: 240 mm
Front:360 mm, 280 mm
|Fan Support||"Top: 2 x 120mm , 2 x 140mm
Front: 3 x 120mm , 2 x 140mm , 2 x 200mm
Rear: 1 x 120mm, 1 x 140mm
Bottom: 2 x 120mm"
|Pre-installed Fans||Front: 3 x 120mm ARGB Fans
Rear: 1 x 120mm Fan
|Drive Bays||"2 x 3.5"" or 1 x 2.5""+1 x 3.5""(HDD Cage)
3 x 2.5"""
|I/O Port||USB 3.0 x1, USB 2.0 x2, HD Audio x1, Fan LED Control x1|
|Clearance||CPU cooler height limitation: 170mm
VGA length limitation: 300mm
PSU length limitation: 150mm
|Dimension(LxWxH)||370 x 216 x 462 mm|
|Net Weight||5.6 kg / 12.35 lb|