Smooth and Uninterrupted
With a trapezoidal tempered glass and three built-in 120mm trio rings ARGB fans to allow high air flow through the aggressive angled slots.
Seamless Tempered Glass
To build a minimalistic style, the side tempered glass is inserted from the back of case, leaving thumb screws to hold the tempered glass in place. A cleaner design displaying the internal components of the PC.
One Click, Sync All
TALOS M1 LITE front 3 ARGB fans support motherboard sync (5v 3-pin) to achieve system-wide RGB lighting synchronization, which makes it easier to unite your group of RGB lights.
Power Supply Cover Design
Building upon inner beauty of the case, a vented power supply shroud at the bottom of the case surrounds the PSU with cutouts displaying the side of the PSU.
Magnetic Dust Filter
A magnetically held dust filter, located on top of the TALOS M1 LITE to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter.
Light It Up, Speed It Up
A single easy push button, controls 3 ARGB fans, cycling though the different effects and LED off. Another button controls the fan to high, mid, low speed, whichever suites your needs.
TALOS M1 LITE Overview
"Amusing and Effective"TALOS M1 LITE, mid –tower case with front trapezoidal tempered glass panel and three eye-catching RGB lighting trio ring fans. Sleek tempered glass panels fully display all components and lead the user to a brand new modding experience!
- Trapezoidal Tempered Glass Panel
- 3 Built-in 120mm Trio Rings ARGB Fans
- Seamless Tempered Glass Window
- Support RGB Motherboard Sync Software
- Power Cover Design
- Magnetic Dust Filter
- One Touch to Easily Switch RGB Streaming Lighting Style, and LED off
|Product Name||TALOS M1 LITE|
|Case Type||MID Tower|
|Motherboard Support||ATX, Micro-ATX, Mini-ITX|
|Synchronization||5V (3pin) with ASUS / MSI /ASROCK / GIGABYTE motherboard|
|Expansion Slots||7 + 2|
|Material||SPCC & ABS & Tempered glass|
|Radiator Support|| Top: 240 mm
Front: 360 mm , 280 mm
Rear: 120 mm
|Fan Support|| Top: 2 x 120mm , 2 x 140mm
Front: 3 x 120mm , 2 x 140mm, 2 x 200mm
Rear: 1 x 120mm , 1 x 140mm
Bottom:2 x 120mm
|Pre-installed Fans||Front: 3 x 120mm Trio Rings ARGB Fans|
|Drive Bays||2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage)
1 x 2.5"
|I/O Port||USB 3.0 x1, USB 2.0 x2, HD Audio x1, Fan LED control x1, Fan Speed control x1|
|Clearance|| CPU cooler height limitation: 170mm
VGA length limitation: 330mm
PSU length limitation: 170mm
|Dimension(LxWxH)||410 x 215 x 485 mm|